|
| |
WelCome Note |
| |
HYDRAULIC MACHINERY is one of the fastest growing compaies in the rapidly changing market working machinery with 40 years of experience and a solid dedication to manufacture only the best press brakes and shears in turkey, which are now becoming one of the world's leaders in this field of work |
| |
|
| |
|
|
|
 |
 |
|
| Conventional, CNC Thickness 3.15-25 mm, Lenght 1500-4000 mm |
-
Mono Block Welded Steel rigid to deflection tensile movement of high tensile.
-
Easy of accurate gap adjustment of blades for bur-free cuts.
-
Polyamide surfaced Hydraulic Hold down cylinders of prevent sliding of the plates during cutting operating.
-
Motorized back gauge with electronic digital readout.
-
Electronically adjustment RAKE ANGLE as per material of thickness for twist free cuts.
-
Synchronized Beem guided system for constant gap between Blades.
-
Extra capacity to cut Hard-thicker plate than nominal capacity.
-
Blades Produced from High alloying steel with functional four side.
-
Adjustable Cutting & clamping force for quality cutting & power saving.
-
Rapid cutting of short pieces by electrical stroke adjustment System.
|
|
|
|
 |
|
| |
(1) Hold down Cylinders for clamping.
(2) Fingure guard for Operator safety.
(3) Hardened & chrome bars for safe feeding
(4) Front sheet supports.
(5) Left squaring arm with hardened & ground liner& stopper -scale.
(6) Lever for blade gap adjustment. |
|
|
|
 |
|
| |
Higher than required rake angle causes twisting of sheet. Hence even heavy Capacity Shears need to reduce the rake angle for cutting Lower thickness veri-rake shear provide this facility. |
|
|
|
|
| Varying Rake (Cutting) Angle Helps |
Cut Thinner Sheets, Softer metals minimal twist at faster rate toget quality in subsequent operation like Punching,
Bending, Drawing. Extra capacity at higher rake angle helps cut inconsistent / thicker than nominal capacity plates wihin limits |
|
|
| Firm Holding of Plate |
before cutting avoids sheet slippage, avoids excess loan on machine, improves blade life |
|
|
|
|
| Three Ways To Set Cutting Width |
Front operated powered backgauge
Shadow of wire over cutting line
Squaring arm mounted scale-stop |
|
|
| Easy Blade Gap Setting Helps |
Cut with minimal force on machine-blades and get clean
Burr-free edges to avoid reworking while welding/assembly |
|
|
|
|
| Easy & Safe Plate Handling |
Hardened bars on recessed table
Front supports help feed long plates
Ramp on near slides cut sheers out |
|
|
|
|
| |
| Model |
Cutting Lenght mm |
Shearing Capacity
Thickness mm
M.S. S.S. |
|
Rake angle range |
Stroke
per min |
NMax.
rake angleo.
of Hold
downs |
Holding Force Kgs |
P
o
w
e
r
H.P. |
Packing
Dimension
mm
(L x W x H) |
Approx
Weight
kg |
N
o
m
i
n
a
l rake |
Max.
rake
angle |
Nominal rake |
Shearing Capacity
Thickness mm
M.S. S.S.ax. rake angle |
Min. rake angle |
|
| JMSV315 |
1500 |
3.15 |
4 |
= |
3.15 |
1 15' |
0.5-3 |
20 |
11 |
8 |
1700 |
3 |
2150X1650X1850 |
2700 |
| JMSV320 |
2000 |
3.15 |
4 |
2 |
3.15 |
1 15' |
0.5-3 |
20 |
11 |
11 |
2000 |
3 |
3200X1850X1950 |
3100 |
| JMSV325 |
2500 |
3.15 |
4 |
2 |
3.15 |
1 15' |
0.5-3 |
25 |
13 |
13 |
2300 |
5 |
3200X1850X1950 |
3500 |
| JMSV330 |
3000 |
3.15 |
4 |
2 |
3.15 |
1 15' |
0.5-3 |
21 |
9 |
15 |
2500 |
5 |
3200X1850X1950 |
4000 |
| JMSV415 |
1500 |
4 |
6 |
3 |
4 |
1 37' |
0.5-3 |
25 |
13 |
8 |
4500 |
7.5 |
3200X1850X1950 |
3200 |
| JMSV420 |
2000 |
4 |
6 |
3 |
4 |
1 37' |
0.5-3 |
23 |
11 |
11 |
6200 |
7.5 |
3200X1850X1950 |
3500 |
| JMSV425 |
2500 |
4 |
6 |
3 |
4 |
1 37' |
0.5-3 |
21 |
8 |
13 |
8000 |
7.5 |
3300X2250X2400 |
5000 |
| JMSV430 |
3000 |
4 |
6 |
3 |
4 |
1 37' |
0.5-3 |
21 |
10 |
16 |
10000 |
10 |
3300X2250X2400 |
6000 |
| JMSV440 |
4000 |
4 |
6 |
3 |
4 |
1 37' |
0.5-3 |
20 |
6 |
20 |
12000 |
10 |
3300X2250X2400 |
8100 |
| JMSV615 |
1500 |
6 |
8 |
4 |
6 |
1 45' |
0.5-3 |
22 |
8 |
8 |
6500 |
10 |
2250X1900X2100 |
4000 |
| JMSV620 |
2000 |
6 |
8 |
4 |
6 |
1 45' |
0.5-3 |
20 |
7 |
11 |
6500 |
10 |
2750X1900X2100 |
4300 |
| JMSV625 |
2500 |
6 |
8 |
4 |
6 |
1 45' |
0.5-3 |
24 |
8 |
13 |
8500 |
10 |
3300X2250X2500 |
6000 |
| JMSV630 |
3000 |
6 |
8 |
4 |
6 |
1 45' |
0.5-3 |
22 |
6 |
16 |
10800 |
15 |
3800X2250X2500 |
7200 |
| JMSV640 |
4000 |
6 |
8 |
4 |
6 |
1 45' |
0.5-3 |
24 |
6 |
20 |
13600 |
20 |
4800X2250X2500 |
9000 |
| JMSV815 |
1500 |
8 |
10 |
6 |
8 |
2 |
0.5-3 |
15 |
8 |
10 |
10500 |
10 |
2250X2050X2200 |
4500 |
| JMSV820 |
2000 |
8 |
10 |
6 |
8 |
2 |
0.5-3 |
18 |
8 |
15 |
12000 |
15 |
2750X2050X2200 |
5500 |
| JMSV825 |
2500 |
8 |
10 |
6 |
8 |
2 |
0.5-3 |
20 |
8 |
20 |
16500 |
20 |
3300X2350X2600 |
7500 |
| JMSV830 |
3000 |
8 |
10 |
6 |
8 |
2 |
0.5-3 |
18 |
6 |
20 |
18500 |
20 |
3800X2350X2600 |
9600 |
| JMSV840 |
4000 |
8 |
10 |
6 |
8 |
2 |
0.5-3 |
18 |
8 |
30 |
23000 |
30 |
4800X2350X2600 |
1250 |
| JMSV1015 |
1500 |
10 |
13 |
8 |
10 |
2 |
0.5-3 |
14 |
6 |
8 |
10500 |
10 |
2250X2050X2300 |
5200 |
| JMSV1020 |
2000 |
10 |
13 |
8 |
10 |
2 |
0.5-3 |
18 |
8 |
11 |
13000 |
15 |
2250X2050X2300 |
6000 |
| JMSV1025 |
2500 |
10 |
13 |
8 |
10 |
2 |
0.5-3 |
15 |
8 |
13 |
17500 |
20 |
3300X2500X2800 |
7500 |
| JMSV1030 |
3000 |
10 |
13 |
8 |
10 |
2 |
0.5-3 |
12 |
6 |
16 |
20000 |
20 |
3300X2500X2800 |
11500 |
| JMSV1040 |
4000 |
10 |
13 |
8 |
10 |
2 |
0.5-3 |
13 |
6 |
20 |
25000 |
30 |
3300X2500X2800 |
15500 |
| JMSV1325 |
2500 |
13 |
16 |
10 |
13 |
2 |
1-3 |
13 |
6 |
13 |
20000 |
25 |
3300X2500X2800 |
8000 |
| JMSV1330 |
3000 |
13 |
16 |
10 |
13 |
2 |
1-3 |
11 |
6 |
16 |
25000 |
25 |
3300X2500X2800 |
12000 |
| JMSV1340 |
4000 |
13 |
16 |
10 |
13 |
2 |
1-3 |
9 |
4 |
20 |
25000 |
30 |
3300X2500X2800 |
15500 |
| JMSV1625 |
2500 |
16 |
20 |
13 |
16 |
2 |
1-3 |
15 |
5 |
13 |
2500 |
30 |
3500X2600X2900 |
15000 |
| JMSV1630 |
3000 |
16 |
20 |
13 |
16 |
2 |
1-3 |
12 |
5 |
16 |
2800 |
30 |
4000X2600X2900 |
17000 |
| JMSV1640 |
4000 |
16 |
20 |
13 |
16 |
2 |
1-3 |
9 |
4 |
20 |
3000 |
30 |
5100X2750X2900 |
20000 |
| JMSV2025 |
2500 |
20 |
25 |
16 |
20 |
2 |
1-3 |
12 |
5 |
13 |
2800 |
40 |
3500X2750X3000 |
18000 |
| JMSV2030 |
3000 |
20 |
25 |
16 |
20 |
2 |
1-3 |
11 |
5 |
16 |
2800 |
40 |
4000X2750X3000 |
20000 |
| JMSV2040 |
4000 |
20 |
25 |
16 |
20 |
2 |
1-3 |
9 |
4 |
20 |
4000 |
50 |
5100X2800X3000 |
24000 |
| JMSV2525 |
2500 |
25 |
30 |
20 |
24 |
2 |
1-3 |
10 |
4 |
16 |
3600 |
60 |
3600X2900X3000 |
25000 |
| JMSV2530 |
3000 |
25 |
30 |
20 |
24 |
2 |
1-3 |
8 |
4 |
18 |
4500 |
60 |
4000X2900X3200 |
28000 |
| JMSV2540 |
4000 |
25 |
30 |
20 |
24 |
2 |
1-3 |
7 |
4 |
20 |
5000 |
75 |
5100X2900X3200 |
32000 |
|
Capacities rated for M.S. Of U.T.S. 45kg/mm2 & S.S. of U.T.S. 72kg/mm2 Yield 45kg/mm2 Machine will not cut any thickness variation beyond rated capacity for any length.Right to change specification, features, accessories without notice reversed. Compliance with safety requirements as per local regulation is responsibility of hte user. |
|
|
|
| Standard Features And Accessories (SV415 onwards) |
Rugged structure from tested plates for continuous runs Rake angle adjustable to suit sheet thickness, material Front operated powered back gauge range 600mmGauging from front on left squaring arm with scale, stop.
Hydraulic hold downs grip sheet firmly before out startsindividual jacks can clamp diff.thickness plates togetherBlade gap setting levers calibrated by sheet thicknessfaster strokes/min for this sheets, smaller widths
HCHCr blades have 4 cutting edges, are interchangeable Cutting and holding force adjustable to suit materials Beam returns on releasing foot switch for smaller cuts First two hold-downs spaced closer at both ends
Left squaring arm 1000mm, replacable hardened liners Right squaring arm 600mm to distribute work and wear Moving beam synchronised by differential cylindersHardened rollers guide beam for constant blade gap.
Recessed table hardened bars for easy feeding long plates
Two front supports 1000mm long for feeding long plates Ramp slides out cut sheets outside 'danger' area at rear Backgauge moves away to allow out sheets fall freely.
|
|
|
| Optional Accessories |
Extra long front support with adjustable screw jacks Disappearing stoppers, scale for front sheet supports Neoprene holddown cups to avoid marks on soft sheets.universal protactor gauge for cutting plates at angles NC Backgauge with LM guides, ballscrews, servo drive Support at rear to support long sheets while gauging Ball transfers on table for smoother handling of plates.
Auto. contact shearing with length selector switch Sheet stacker, conveyor for auto handling of cut sheets Shears With Cnc Controls with options of automaticBackGauge, Blade Gap, RakeAngle, Cutting Length Setting. Integreted with sheet conveyor, stacker,etc. NC Front Gauging And Feeding SystemDrivesadjustable to suit plate width, operator position. Referencing from single edge avoids accumulated error.Fully supported sheet -eliminateserror due to sagging. Clear view of sheet contact reduces chances of error.
Efficient hydraulic powerpack with minimal pipingElectricals neatly wired-labelled for trouble shootingComprehensive operation and maintenance manualFirst fill of hydraulic oil not in standard scope of supply.
Activation from front console and movable footswitch Finger safety guard with clear view of lighted cutting area Main drive motor with hydraulic powerpack, controls Hydraulic, electricals from dependable global brands. |
|
|
|
|
