|
| |
WelCome Note |
| |
HYDRAULIC MACHINERY is one of the fastest growing compaies in the rapidly changing market working machinery with 40 years of experience and a solid dedication to manufacture only the best press brakes and shears in turkey, which are now becoming one of the world's leaders in this field of work |
| |
|
| |
|
|
|
 |
|
 |
Over forty years' experience in the sector allows us to offer a competitive product in constant renewal. One of the "hystorical" product is the bending press model
T.22 Scanja press belongs to the NORMAL SERIES of SIMASV bending press. Its special structure makes it ideal for press bending, bending, punching and cutting of all types of section bars, flat bars and tubes. The positioning of the cylinder under the workbench allows freedom of action for any type of operation on the workbench, and the controls set at the front of the machine give the operator a high degree of control over the working area during the operating phases.
The workbench is manufactured in tempered and ground steel, the carriage runs on double guides with dust scraper and forced lubrication. The mobile pin moves at two speeds and the stroke is adjusted via a high precision electrical limit switch.
Other models of SIMASV bending machines in sections:
HORIZONTAL PRESSES |
|
 |
|
|
| EDGE BENDING OF FLATS , ANGLES , CHANNELS |
- For hard way bends , R > 3-4 x material with
- This allows for expansion – contraction of material
-
Channel , angle , special section can be formed edge wise by tools designed to internally support or confine side walls by segmented tools or by filling with sand during forming . This reduces twisting , helps release parts after bending , Improves tool life
|
 |
| |
Eye Bends- In /Off Center
- Dia . of eye set by varying radius pins or collar
- Marking reduced by lubricating the grove
- Flattening on inside reduced by grooving the pin
- Smallest radius depends on ductility , tool strength
Springs , Loops , Coils
U/Zero Radius Bend
Scrolls
- Formed by collar of required shope
|
|
| |
 |
| |
|
 |
Rotary Draw Bending Attachment
-
Work piece strapped against bending former by a metal vice/strap and pushed against it by a pressure tool. Bending former rotates while pulling the job against pressure tool
-
The pressure tool can be a wiper die ,block or a roller for rotary bends without mandrels , generally :-
-
Tube may flatten on outside , crease on inside
-
Spring back varies from 2-10% but depends on ductility , radius of bend , is more without mandrel
-
Allows upto 180 bends in one movement.
|
|
 |
| Mdel HBP |
|
20 |
20 |
30 |
70 |
120 |
200` |
300 |
| Force |
Tons |
20 |
20 |
30 |
70 |
120 |
200 |
300 |
| Tools Stations |
|
One |
Two |
One |
One |
One |
One |
One |
| Tool Height |
mm |
150 |
150 |
180 |
300 |
550 |
600 |
850 |
| Stoke Lenght |
mm |
200 |
200 |
300 |
350 |
450 |
550 |
550 |
| I/v ma. for M.S. |
cm |
30 |
30 |
60 |
|
1500 |
|
|
| Bends Pipes Sch40 |
mm |
3" |
3" |
4" |
8" |
16" |
|
|
| Motor Power |
H.P. |
5 |
5 |
7.5 |
10 |
15 |
25 |
40 |
| Weight |
Kgs |
800 |
1000 |
1200 |
2200 |
5200 |
6800 |
12500 |
|
|
 |
|
 |
 |
|
 |